PC-ABS

PC-ABS blends the impact strength and heat resistance of polycarbonate with the processability and finish of ABS. A practical middle ground for housings and enclosures.

Impact resistantGood finishHeat tolerant
Design for manufactureGeometry assessed in context
Process-led adviceRoute matched to application
Clear engineering evidenceUseful, visible and verifiable

What the blend gives you

PC-ABS takes the toughness and heat tolerance of polycarbonate and tempers it with ABS, which makes the material easier to process and more forgiving than PC on its own.

Surface finish is good, so parts look like moulded components rather than printed ones.

It takes secondary operations well: sanding, painting, and in some grades plating.

Where PC-ABS works well

Enclosures and housings for electronics and instrumentation.

Automotive interior parts and trim where heat and impact both apply.

Consumer-facing covers where finish matters as much as strength.

Brackets that need more toughness than ABS but do not justify full polycarbonate.

The constraints to design around

It contains styrene, so it is affected by some solvents and is not the material for continuous UV exposure without a stabilised grade.

It is tougher than ABS but less tough than unfilled polycarbonate, so impact-critical parts should still default to PC.

It needs drying before processing, like all hygroscopic blends.

How we approach PC-ABS parts

We compare it against plain ABS and plain PC on the actual duty, then recommend whichever gives the required toughness at the lowest cost.

FAQs

Is PC-ABS stronger than ABS?

Yes, in impact and heat resistance. It is also slightly harder to process, which is reflected in the price.

Can PC-ABS be painted?

Yes. It takes paint and finishing well, which is one of the reasons it is used for visible housings.

Is it suitable outdoors?

Not for long-term sun exposure unless the grade is UV stabilised.