What polycarbonate does well
Polycarbonate is the toughest of the common engineering plastics. It absorbs impact that would shatter acrylic or crack ABS, which is why it turns up in machine guards and safety covers.
It holds useful strength at elevated temperatures, well beyond what PLA, PETG or ABS will take.
Optical grades allow clear and translucent parts, so sight glasses, light covers and windows can be printed rather than bought.
Where PC works well
Machine guards, safety covers and impact shields.
Housings and brackets that see heat or mechanical abuse.
Clear or translucent parts where visibility is part of the function.
Structural brackets in equipment that is handled roughly.
The constraints to design around
Polycarbonate absorbs moisture and must be dried before processing, otherwise surface finish and layer strength suffer.
It warps readily and wants a hot, stable build environment, so large parts need considered geometry rather than thin flat plates.
Polycarbonate is susceptible to stress cracking with some solvents and adhesives. Cleaning agents and thread-lockers should be checked against the part.
It scratches more easily than glass, which matters for clear parts in service.
How we approach PC parts
Because polycarbonate is often chosen for protection, we review what the part is protecting against before manufacture. Anything carrying load, sealing pressure or protecting a person goes to engineering review.
FAQs
How hot can polycarbonate parts run?
It retains useful strength well above the commodity plastics, but the exact figure depends on load and duration. Tell us the service temperature and we will confirm.
Can you print clear polycarbonate?
Clear and translucent grades are available. Printed parts are translucent rather than optically perfect, and can be polished if clarity matters.
Is polycarbonate better than ABS?
It is stronger and more heat resistant. ABS is easier to process and cheaper. The right answer depends on the duty.

