What the carbon fibre adds
Carbon-filled polycarbonate is one of the stiffest materials we print. It resists deflection under load far better than unfilled PC, which is what matters in a fixture that has to stay true.
The fibre lowers thermal expansion, so parts hold their dimensions through temperature swings better than the unfilled polymer.
It keeps most of the impact and heat resistance of the base polycarbonate.
Where it earns its cost
Inspection and assembly fixtures where a fraction of a millimetre matters.
Structural brackets and mounts carrying genuine load.
Tooling and end-effector parts on automation.
Replacement parts for metal components where weight matters but stiffness cannot be lost.
The constraints to design around
It is abrasive, so it is processed on hardened hardware, and that is reflected in the material cost.
Short-fibre reinforcement is anisotropic: a part is stronger along the fibre direction, so orientation should follow the load path.
It is stiff rather than ductile. Where a part must absorb shock, unfilled PC is usually the better answer.
How we approach reinforced parts
We ask what the part has to hold and in which direction, then lay it out so the fibres work with the load rather than across it. Load-bearing parts go to engineering review.
FAQs
Is PC carbon fibre stronger than aluminium?
For stiffness in the fibre direction it is competitive at a fraction of the weight. For absolute strength and fatigue in critical duty, metal remains the reference.
Can it be machined after printing?
Yes, though the carbon content is abrasive on tooling. Tell us if post-machining is planned so we can allow material.
Why is it more expensive?
The fibre itself and the hardened hardware it requires both add cost. It is chosen where stiffness justifies it.

